Ethernet cables

The purpose of an ethernet cable is to connect you to the internet
The Materials you will need are:

1. 2 rj 45 jacks


2. clamper


3. wire cutters


4. cable

Instructions:

1. Cut cord to desired length


2. take wire cutters and strip the blue tubing


3. uncoil the wires and put them in the color order


4. Light orange, dark orange, light green,dark blue,light blue, dark green,light brown, dark brown.


5. Take an rj 45 jack with clip upside down and put it on the wires so they are in order


6. once you have it in the right order clamp it down.


7. Repeat steps 1-6 for other side

To test it you put it in a ethernet tester and make sure you have green lights

The first time I made my ethernet cable it was pretty hard, because i couldn't get them to stay in order